Specifications; Attachments/Accessories - Toro Pro Sneak 365 Operator's Manual

Regeneration-Request Light
This light illuminates along with the high-temperature-exhaust
indicator when a regeneration is in process. If this light is
illuminated on its own, a stationary regeneration is possible.
When a regeneration is requested but the regeneration inhibit
switch is active, this light will blink. If this light is illuminated
along with the check engine light, your DPF needs servicing;
contact your Authorized Service Dealer for more information.
Check-Engine Light
This light illuminates when there is an engine problem. If the
light illuminates when the engine is running, stop the engine,
remove the key, and check for a possible cause. If this light
is illuminated along with the regeneration request light, your
DPF needs servicing; contact your Authorized Service Dealer
for more information.
Hydraulic-Oil-Temperature Light
This light will illuminate if the hydraulic system overheats.
If the light illuminates when the engine is running, stop the
engine, remove the key, and check for a possible cause.
Hydraulic-Oil-Filter Light
This light illuminates if the hydraulic oil filter is in need of
service. If this light illuminates when the engine is running,
stop the engine, remove the key, and service the filter.
Neutral Indicator
This light illuminates when all control levers are in the Neutral
position.
Air-Filter Light
This light illuminates if the air filter is in need of service. If
this light illuminates when the engine is running, stop the
engine, remove the key, and service the air cleaner.
High-Temperature-Exhaust Indicator
This light illuminates when the DPF is undergoing
regeneration.
Regeneration-Inhibit Indicator
This light illuminates when automatic background
regeneration has been turned off.
Regeneration-Acknowledge Switch
This switch manually activates a stationary regeneration.
This light on the switch will illuminate when a stationary
regeneration is in progress. If the regeneration request light
and the light on the switch are both blinking, the regeneration
inhibit switch must be turned off for a background
regeneration to occur. If the regeneration request light is
illuminated and the light on the switch is blinking, contact
your Authorized Service Dealer for more information.
Regeneration-Inhibit Switch
This switch will disable the automatic background
regeneration.

Specifications

Note: Specifications and design are subject to change
without notice.
Width
Width (narrow wheels)
Length (with vibratory plow)
Height
Weight
Operating capacity
Tipping capacity
Wheelbase

Attachments/Accessories

A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
Important: Use only Toro approved attachments.
Other attachments may create an unsafe operating
environment or damage the machine.
14
117 cm (46 inches)
91 cm (36 inches)
291 cm (114 inches)
216 cm (85 inches)
1,329 kg (2,930 lb)
251 kg (553 lb)
717 kg (1,580 lb)
122 cm (48 inches)