Product Overview; Controls - Toro 68038 Operator's Manual

Product Overview

1. Operator platform
2. Steer tires
3. Reverse-speed-control
lever

Controls

Become familiar with all the controls
you start the engine and operate the machine.
Brake Pedal
Apply the foot-operated brake pedal to stop the
machine (Figure 3).
Forward-Speed-Control Lever
Squeeze the forward-speed-control lever
move the machine forward. The more you squeeze
the handle, the faster the machine will travel.
Reverse-Speed-Control Lever
Squeeze the reverse-speed-control lever
reverse the movement of the machine. The more you
squeeze the handle, the faster the machine will travel.
Dump Handle/Pedal
Pull the dump handle backward and/or press on the
front of the pedal to dump the hopper
the dump handle forward and/or press on the rear of
the pedal to lower the hopper.
Parking Brake Lever
To engage the parking brake, pull up on the lever.
(Figure 3).
4. Drive tires
5. Handle bars
6. Forward-speed-control
lever
(Figure 3) before
(Figure 3) to
(Figure 3) to
(Figure 3). Push
Figure 3
7. Dump handle/pedal
8. Fuel tank
9. Parking brake
To release the parking brake, press the button on the
end of the brake handle and lower the lever.
Fuel Gauge
The fuel gauge is part of the fuel-tank cap, and the
gauge indicates the amount of fuel in the fuel tank
(Figure 3).
Fuel-Tank Shutoff Valve
The fuel-tank shutoff valve is located at the bottom of
the fuel tank. The shutoff valve is used to control the
flow of fuel from the tank when you are performing
maintenance or storing the machine
10
10. Brake pedal
(Figure 4).
g019617