Wiring - Furuno FSS-3BB Installation Manual

2.

WIRING

The following figure shows the general connection for the FSS-3BB. For detailed in-
formation, see the interconnection diagram. Many of the cables mentioned are JIS
(Japan Industrial Standards) cables. If not available locally, use the equivalent. See
the cable guide in the Appendix for how to select equivalent cables.
TTYCSLA-1Q
Navigation Equipment
*1, *3
USB Device
MJ-A3SPF0018-050ZC, 5 m
12-24 VDC
Rectifier
RU-1746B-2
100/110/115/220/230 VAC,
1Ø, 50/60 Hz
MJ-A3SPF0018-050ZC, 5 m
12-24 VDC
Rectifier
RU-1746B-2
100/110/115/220/230 VAC,
1Ø, 50/60 Hz
*1
: A maximum of four USB devices including RCU-026 can be connected to the processor unit.
*2 : To use the USB port on the RCU-026, connect the RCU-026 to the USB port on the processor unit, using
the USB cable supplied with the RCU-026. If you do not use the USB port on the RCU-026, the USB
connection between the RCU-026 and processor unit is not required.
*3
: To extend the distance between the processor unit and the monitor unit/USB device, use the optional
DVI/USB repeater.
Monitor Unit
HDMI cable/
HDMI-TO-DVI-L, 5.3/10.3 m
NMEA0183
5 ports
USB
Processor Unit
USB3.0: 2 ports
USB2.0: 2 ports
DTIC5E350SLABVCVxxT,
Max 100 m
Transceiver Unit
*3
HDMI
2 ports
RS-485
USB
FSS-301
RS-485
USB
LAN
TS-20-071-1,
5 m
MPYCSLA-4
FSS-302
Transducer
Trackball Control Unit
RCU-026
USB Device
*
Trackball Control Unit
RCU-026
USB Device
*
External KP
*2
*2
2-1