Furuno FSS-3BB Installation Manual page 50

Fish species and biomass sounder
Hide thumbs Also See for FSS-3BB:
Table of Contents

Advertisement

3. INITIAL SETTINGS
Menu item
[Stabilization Sensor]
[Delay Time [msec]]
[Stabilization Area]
4. Select the [HF] from the menu on the left-hand side of the window.
5. Set the antenna position of the SATELLITE COMPASS
[ANT TD height]
• [TD fore-aft]: Distance from antenna to transducer on the fore-aft line (setting
range: -100.0 to +100.0 m). Enter to a positive value for a fore-side transducer,
a negative value for an aft-side transducer.
• [TD port-stbd]: Distance from antenna to transducer on the port-stbd line (set-
ting range: -100.0 to +100.0 m). Enter a positive value for starboard-side trans-
ducer, a negative value for a port-side transducer.
• [ANT TD height]: Vertical distance between the antenna and the transducer
(setting range: 0.0 to 100.0 m).
6. Select [LF] from the menu on the left-hand side of the window, then set up the LF
(low frequency) transducer in a similar manner.
7. Click the [OK] button to apply the settings and close the menu.
3-16
Select the model of the SATELLITE COMPASS
selected, adjust [Delay Time [msec]].
Adjust the delay time of the sensor (setting range: 0 to 300 ms).
This menu item is available when [Stabilization Sensor] is set to
[Manual].
• For SC-50/SC-110: Set to "200 msec".
• For other models: Set to "50 msec".
When heaving exceeds the value set here, stabilization is
stopped and the stabilization icon at the top of the screen is dis-
played with an "×", indicating it has stopped (setting range: 0 to
20 m). However, the setting for [Stabilization] is kept [On].
When heaving is once again less than the value set here, sta-
bilization is restarted and the "×" disappears.
××.××
Advanced Settings
IDENTI-FISH
ID1
TD fore-aft
ID2
TD port-stbd
A A larm
System
A
A NT TD height
A
Range
TX/RX
HF
LF
Control Unit
User Interface
Settings
Calibration
HF
LF
Stab
Stabiliz
ilizatio
ation
n
HF
HF
LF
Mode
Mode
Tests
Test
s
SATELLITE COMPASS
Transducer
Description
Stabilization : HF
0.0
0.0
0.0
TM
SATELLITE
COMPASS
TM
Port (-)
. If [Manual] is
.
[TD port-stbd]
Bow (+)
Transducer
[TD fore-aft]
Starboard (+)
Stern (-)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents