Furuno FSS-3BB Installation Manual page 33

Receiver Unit
Ground wire *2
IV-1.25sq.
Ship's ground
Monitor Unit
USB Device
(Max. 2 units)
The LAN and USB cables must be fastened to the cable clamp, using a cable tie (local
supply).
After wiring, reattach the protective cover.
Note: The cable clamp for the USB and LAN cables can be adjusted to accommodate
the connectors of those cables. See the following figure.
*1
WO2511 , 30 m
*1
WO2512 , 50 m
*1
WO2513 , 100 m
Not used.
DVI-D
Ground wire
IV-1.25sq.
HDMI-TO-DVI-L
5.3 m
RNS-08-132
12-24 VDC
Unfasten the indicated screws to adjust the cable clamp. Refasten
the screws to secure the cable clamp after adjustment.
Transmitter Unit
DVI-D
*2
Ship's ground
*1*4 ,
*1
, 5 m
Processor Unit
(Example figure: Receiver unit)
2. WIRING
Not used.
MJ-A3SPF0024-035C
3.5 m
12-24 VDC
*1
: Option
*2 : Local supply
*3 : Maximum 5 m length
*4 : Maximum 5.3 m length
2-13
*1
,