Table of Contents
Advertisement
3. INITIAL SETTINGS
Menu item
[Out Trigger]
[Trigger Output]
[Temp Source]
[IIMTW Sentence]
[Random TX]
[White Marker]
[TruEcho CHIRP]
[Bottom Noise Rejector]
[PRC Settings]
[Input PRC Settings]
[Export PRC Settings]
[Update PRC Settings]
: The corresponding setting on the initial setting menu takes precedence.
*1
: System reboot is required to apply the settings. The following confirmation mes-
*2
sage appears. Click the [Yes] button to reboot the system. A buzzer sounds during
the system reboot because the communication between the processor unit and the
trackball control unit is disconnected temporarily. The buzzer is stopped after com-
pleting the system reboot.
3-8
The FSS-3BB outputs the KP signal when HF or LF echo
is transmitted. Select [Auto] to switch the KP signal out-
put settings.
Select the polarity ([Positive] or [Negative]) of the KP sig-
nal that is output from the FSS-3BB to the external equip-
ment.
Select the data source of the water temperature data.
• [NMEA]: Use the data that is input from the
NMEA0183 equipment.
• [Transducer]: Use the data from the transducer.
When the Simrad ITI net sensor is connected, select [ITI
*1
Net Sensor] from the [IIMTW Sentence] pull-down list.
When not connected, select [Off] or [Water Temperature
Gauge].
Note: The following net sensors are compatible with this
equipment.
Not used at installation.
The unit will be restarted.
Yes
Description
Manufacturer
Marport
TE-155
Imaginex
TS-337A
Simrad
ITI System
Confirm
Are you sure?
No
Model
Hide quick links:
Advertisement
Table of Contents
