Furuno FSS-3BB Installation Manual page 40

3. INITIAL SETTINGS
3.2.2 [Shared Settings] menu
Set the monitors, KP control signals, etc. on the [Shared Settings] menu.
To access the [Shared Settings] menu, open the service menu referring to
section 3.2.1 and select [Shared Settings] from the menu on the left-hand side of the
window.
HF
LF
Stabilization
HF
LF
Mode
Tests
Service
Shared Settings
HF
LF
Fish Size
HF
LF
IDENTI-FISH
HF
LF
Transducer Setting
HF
LF
Show the software
keyboard.
Menu item
[Display Resolution]
[Sub Monitor Position]
[Sub Monitor Display Reso-
*1, *2
lution]
3-6
××.××
Advanced Settings
Service : Shared Settings
Display Resolution
Sub Monitor Position
Sub Monitor Display Resolution
External IDENTI-FISH Echo Window
Date Auto Adjust
Date Setting
Time Setting
Time Zone
Bottom Search
TX Triggering
In Trigger
Trigger Input
Out Trigger
Trigger Output
Temp Source
IIMTW Sentence
Random TX
Restore Default Settings
Reset all menu settings to
factory default.
(This button is shown only when
the service menu is unlocked.)
Select the display resolution of the monitor unit that is
*1, *2
connected to HDMI1 port.
• [XGA]: 1024×768
• [SXGA]: 1280×1024
• [UXGA]: 1600×1200
• [FullHD]: 1920×1080
• [WUXGA]: 1920×1200
Select the sub monitor position (left/right). When the sub
*1, *2
monitor is not connected, select [Off].
Select the display resolution of the sub unit that is con-
nected to HDMI2 port.
• [XGA]: 1024×768
• [SXGA]: 1280×1024
• [UXGA]: 1600×1200
• [FullHD]: 1920×1080
• [WUXGA]: 1920×1200
XGA
Off
XGA
Off
On
2019/08/30
16:22:19
(UTC+09:00) Osaka, Sapporo, Tokyo
Auto
Off
Auto
Positive
NMEA
Off
On
OK Apply Cancel
Description
Reset the menu settings
on the right side of the
menu to factory default.
Apply changes and
close the menu.
Apply changes.
(Menu remains open.)
Cancel changes and
close the menu.