JUKI AMS-221EN Series Engineer's Manual page 210

Error code Display
E017
E019
E024
E027
E028
E029
E030
E031
Description of error
Capacity over of sewing
machine memory
Machine memory capacity is
insufficient.
File size over
Fail is too large.
Pattern data size over
Memory size is over.
Read error
Data read from server cannot
be performed.
Write error
Data write from server cannot
be performed.
Media slot release error
Lid of media slot is open.
Mispositioning error of the
needle bar
Needle bar is not in the
predetermined position.
Air pressure drop
Air pressure is dropped.
Display message
Capacity is insufficient.
(Machine)
Pattern data is too large.
(Approx. 50,000 stitches)
Memory size to large.
Data cannot be read.
Data cannot be written.
Cover of Media slot is
open.
Needle is not in a proper
position.
Low air pressure.
– 206 –
How to recover Place of recovery
Possible to Previous
re-start after screen
reset.
Possible to Previous
re-start after screen
reset.
Possible to Data input
re-start after screen
reset.
Possible to Previous
re-start after screen
reset.
Possible to Previous
re-start after screen
reset.
Possible to Previous
re-start after screen
reset.
Turn hand Data input
pulley to screen
bring needle
bar to its
predetermined
position.
Possible to Data input
re-start after screen
reset.