JUKI AMS-221EN Series Engineer's Manual page 160

E
4. Pressing the top left position
Press the red circle
the screen. To complete correction, press the cancel
button
B
5. Pressing the top right position
F
Press the red circle
the screen. To complete correction, press the cancel
button
B
6. Data saving
When all the four points have been pressed, the cor-
rection data are saved. At that time, the Power OFF
Prohibition screen is displayed.
The power supply must not be turned off while the
above-mentioned screen is displayed.
If the power supply is carelessly turned off, no cor-
rection data are saved.
After data saving, the check program screen is auto-
matically displayed.
– 156 –
(E) located at the top left of
(B).
(F) located at the top left of
(B).