JUKI AMS-221EN Series Engineer's Manual page 145

2. Batch customize
In the key lock customize selection screen, batch customize is possible.
(1) Press the button A for about 1 second. Buttons in all the changed screens are disabled and the customize setup
conditions are saved. In addition, the pictogram "B" is displayed at top left of the pressed button (*Caution). The
pictograph "B" indicates that all buttons in all the screens changed from the pressed button are disabled.
(2) When the button is kept pressed for about one second in the state that the pictograph "B" is displayed, all
buttons in all the screens transferred from the pressed button are put into the no-display setup and the customize
setup conditions are saved. The pressed button stays in the frame-only display C (*Caution). This indicates that
all buttons in all the screens changed from the pressed button are set to the no-display setup.
(3) If the button is kept pressed for about one second in the state that the frame-only button is displayed, all buttons
in all the screens transferred from the pressed button are set to the factory shipment setup and the customize
setup conditions are saved (*Caution).
(*Caution) When the setup conditions of a button are changed, those of other buttons having the same
function are also changed. Such buttons as those having the same function may be present
beyond screens. Therefore, the display of buttons other than the pressed button may change.
A
B
Press the button
for 1 second.
Setting of all buttons disabled
Press the button for 1 second.
– 141 –
C
Press the button
for 1 second.
Setting of all buttons
for no display