JUKI AMS-221EN Series Engineer's Manual page 128

M
L
O
P
On the port setup screen, current setting items are dis-
played at the top left of the screen.
: Output information (High) setup screen
: Output information (Low) setup screen
: Input information (High) setup screen
: Input information (Low) setup screen
Using the page turning buttons
displayed port type can be changed.
The port comes in the four types as specified below.
: Output port No.
: Input port No.
: Virtual I/O port No.
etc.: Presser SW 1 to 4, Start SW, Temporary stop
SW
The port No. button is displayed on the screen. Press
the button that corresponds to current setting.
The selection status button is displayed in gray.
After selection, press the Enter button
For output setting, press the output button
obtain the item for which the displayed step has been
set up. Therefore, this item can be examined.
– 124 –
(M, L), the
(O).
(P) to