JUKI AMS-221EN Series Engineer's Manual page 143

(3) Customize setup
Hold down a button to disable the operation for about 1 second. The pictograph D to indicate the operation
disabling setup is displayed at top left of the button. In actual operation, the setting state is displayed as shown
in the figure E.
When the button is kept pressed for about 1 second further in the state of operation disabling setup, the button
frame only is displayed as shown in the figure F, suggesting the no-display setup. In actual operation, the setting
state is displayed as shown in the figure G.
However, such buttons cannot be customized as those that may cause some problems in sewing machine
operation by making the operation disabling setup or no-display setup.
When the button is pressed further for about 1 second in the state of no-display setup, the frame-only display
turns into an original display and the operation enabling setup becomes available.
(Caution) When the setup conditions of a button are changed, those of other buttons having the same
function are also changed. Such buttons as those having the same function may be present
beyond screens.
In actual operation
Press the button
for 1 second.
D
Operation disabling setup
Press the button for 1 second.
E
– 139 –
Press the button
for 1 second.
F
G
No-display setup