JUKI AMS-221EN Series Engineer's Manual page 171

A
B
C
D
10) Method of continuous operation
1. Display of the continuous operation setup screen
When the continuous operation button
pressed on the check program screen, the continu-
ous operation setup screen is displayed.
2. Continuous operation mode setup
In the continuous operation setup screen, the con-
tinuous operation mode is set up.
B : Intervals of operation (rest time)
C : Origin retrieval at the end of sewing
0 : No
1 : Every 100 runs
2 : Every time
D : Presser lifting, lowering (frequency)
Press the enter button
pictograph to determine the setup mode for continu-
ous operation.
E
3. Perform the continuous operation
Turn on the ready key
displayed, and the continuous operation starts. When
the pause switch is pressed, the continuous operation
stops. When the sewing is performed again, the
continuous operation starts again. To release the
continuous operation, restart the machine after
turning off the power supply once.
– 167 –
(A) is
(E) with the use of this
. The sewing screen is