JUKI AMS-221EN Series Engineer's Manual page 172

B
H
I
C
A
G
F
E
D
11) Method of intermediate presser motor / origin
sensor check
1. Display of the intermediate presser motor / ori-
gin sensor check screen
When the intermediate presser motor / origin sensor
check button
program screen, the intermediate presser motor /
origin sensor check screen is displayed.
2. Intermediate presser motor / origin sensor check
According to the status of the intermediate presser
origin sensor, the ON/OFF condition of the interme-
diate presser origin sensor is displayed in the posi-
tion of B.
Using the [+] and [–] buttons
intermediate presser motor can be driven by one
pulse.
When the fixed position moving button
pressed, the intermediate presser motor is driven to
any of the following fixed positions. A pictograph in-
dicating this position is reversed and displayed.
F : Lower position at the height of 7mm during
lowering
G : Lower position at the height of 3.5mm during
loweing
H : Lower position at the height of 0mm during
lowering
I : The lowest position in the mechanism
The START Switch is used for the origin retrieval of
the intermediate presser motor.
– 168 –
(A) is pressed on the check
(C, D), the
(E) is