JUKI AMS-221EN Series Engineer's Manual page 122

E
L
H
I
B
G
3) Port I/O setup
J
To make output number setting, input number set-
ting, and virtual I/O number setting, the setup button
K
(G) is pressed to enter an input of the setting
function number (H) in the selected terminal through
the ten key (I). The signal type is selected from High
(J) and Low (K). In the case of virtual I/O number
setting, it is selected from output
To make switch operation setting, the setup button
(L) is pressed to select the signal type from High
(M) and Low (N).
M
N
– 118 –
F
and input .