JUKI AMS-221EN Series Engineer's Manual page 107

6. Presser pedal setup
Using the memory switches U084 to U087 below, it is possible to set up the method of
pedal operation.
U084 : Used to set up the method of pedal operation for Pedal 1.
(Standard pedal, PK47 right)
U085 : Used to set up the method of pedal operation for Pedal 2.
(PK47 left intermediate)
U086 : Used to set up the method of pedal operation for Pedal 3.
(PK47 left treading-on)
U087 : Used to set up the method of pedal operation for Pedal 4.
(Not used)
Setup
Non-latch
Latch
Contents
The feeding frame is lowered only if the
pedal is trodden on. It is lifted when the
pedal is released.
The feeding frame is lowered when the
pedal is trodden on once. It is left lowered
ven when the pedal is released. It is lifted
when the pedal is trodden on secondly.
Explanation
– 103 –