JUKI AMS-221EN Series Engineer's Manual page 164

No. Pictograph
∗
Sensor applications
No. Sensor data
11 AU DET sensor
12 AD DET sensor
13 D DET sensor
14 U DET sensor
15 TG sensor
16 P DETsensor
17 S DET sensor
Contents of sensor
External input 6
External input 7
External input 8
External input 9
External input 10
External input 11
For needle bar reverse revolution (5° to 30°)
For needle bar DOWN stop (209° to 239°)
Not used (For thread cutting timing of former models)
For needle bar UP stop (40° to 62°)
ON-OFF by dividing one turn of the main shaft into 45 portions.
For feed timing
Not used. (ON-OFF by dividing one turn of the main shaft into 2 portions.)
No. Pictograph
Applications
– 160 –
Contents of sensor
External input 12
External input 13
External input 14
External input 15
External input 16