JUKI AMS-221EN Series Engineer's Manual page 129

T
3) Parameter input
Corresponding to the selected command, the param-
eter input button is displayed.
When the parameter input button (Q) is pressed, the
parameter input screen is displayed.
Enter a numerical input through the ten key (R) and
press the Enter button
In regard to the parameters that correspond to the
Q
commands, refer to (4) list of simplified program com-
mands.
R
S
4) Step insertion
It is possible to insert a step before the displayed
step.
When the step insertion button
the command selection screen is displayed.
Select the command that is required to be inserted,
and press the Enter button
required step is inserted.
U
– 125 –
(S).
(T) is pressed,
(U). Then, the