JUKI AMS-221EN Series Engineer's Manual page 151

4. Use of media other than those packed together
When the contents of the media packed together are going to be copied on another media, the media of the copying
destination should be formatted with IP-420. Since then, the following directory configuration should be established
with a personal computer.
Information about the method of media card formatting is obtainable from the Instruction Manual, [2-28. Performing
formatting of the media].
Route directory
[ ] = Folder
xxxxxx = RVL code (6 digits)
[PROG] [AMS221EN]
[AMSEN]
– 147 –
BPxxxxxx.prg (Servo program)
MAxxxxxx.prg (Main program)
[BPxxxxxx]
BPxxxxxx.hed
BPxxxxxx.p01
BMxxxxxx.i01
BMxxxxxx.i10
BMxxxxxx.i11
BMxxxxxx.i12
BMxxxxxx.i21
BMxxxxxx.i22