Minolta EP1080 Service Manual page 122

2. Misfeed Detection Timing
1) Take-up failure detection
1st Drawer Paper Take-Up Sensor PC55
is not activated within approx. 2.39
seconds after 1st Drawer Paper Take-Up
Solenoid SL2 has been energized.
2nd Drawer Paper Take-Up Sensor
PC56 is not activated within approx. 2.39
seconds after 2nd Drawer Paper
Take-Up Solenoid SL3 has been
energized.
2) Trailing edge detection
1st Drawer Paper Take-Up Sensor PC55
is not deactivated within approx. 4.65
seconds after it has been activated.
2nd Drawer Paper Take-Up Sensor
PC56 is not deactivated within approx.
4.65 seconds after it has been activated.
3) Leading edge detection by Transport Roller Sensor
Transport Roller Sensor PC51 is not
activated within approx. 1.7 seconds
after 1st Drawer Paper Take-Up Sensor
PC55 has been activated.
Transport Roller Sensor PC51 is not
activated within approx. 2.5 seconds
after 2nd Drawer Paper Take-Up Sensor
PC56 has been activated.
4) Trailing edge detection by Transport Roller Sensor
Transport Roller Sensor PC51 is not
deactivated within approx. 4.31 seconds
after a TRON signal has been input.
SL2
about 2.39sec
PC55
SL3
about 2.39sec
PC56
about 4.65sec
PC55
about 4.65sec
PC56
PC55
about 1.7sec
PC51
PC56
about 2.5sec
PC51
TRON
about 4.31sec
PC51
M-96
1139T34MC
1139T34MCA
1139T35M
1139T35MCA
1139T36MCA
1139T36M
1139T37M
1139T37MCA
1139T38MCA 1139T38MCA
1139T39MCA 1139T39MCA
1139T40MCA
1139T40MC