Minolta EP1080 Service Manual page 185

AUTO
C
1139D047CA
Start
Panel reset
1139D019CA
6. Press the Clear Key to clear the current setting value.
7. With the old setting value used as reference, enter the
new setting value using the appropriate Multi-Copy
Keys.
NOTE
If the erase width on the copy is less than 0.5 mm,
increase the setting value.
If the erase width on the copy exceeds 6.5 mm,
decrease the setting value.
8. Press the Start Key to validate the setting.
9. Press the Panel Reset Key twice (or turn OFF the
Power Switch) to return the copier back to the normal
mode.
10. Make two single copies and check for leading edge
erase width on the second copy. (If it does not meet
the requirement, perform steps 3 through 9 again.)
D-62