Minolta EP1080 Service Manual page 212

Types of Misfeed Counters
Paper
Select Type
Key
ON Exit
AD-3/PF-1D
ON
entrance/transport
ON AD-3/PF-1D
ON ST-101/S-104
ON AF-3/AFR-7
*
If a PF-101 (for Inch Areas) is being used, the misfeed count for PF-101 is shown as the
PF-201 3rd Drawer count. No count is given for PF-201 4th Drawer.
NOTE
A malfunction or misfeed at areas other than the Fusing Unit can be reset by
closing the Front Door after the malfunction has been corrected or misfeed cleared.
Setting Procedure
(1) With the copier in the state ready to enter a particular Tech. Rep. Mode, press "6" to set the
copier into the Misfeed Counter Mode.
(2) Press the Paper Select Key, and the first misfeed count appears on the Magnification Ratio
Indicator. Press the Paper Select Key to obtain the count of each Misfeed Counter. The
corresponding LED lights up on the Monitor Display when the misfeed count of that particular
location is shown. After all counts have been shown, the copier is then ready to receive a
clear command.
Clearing a Misfeed Counter
(1) Show the count of the Misfeed Counter to be cleared on the Magnification Ratio Indicator.
(2) Press the Clear Key.
Pressing the Stop Key immediately after the Clear Key has been pressed will undo the clear
command.
Magnification
Monitor Display
Ratio Indicator
XXX
1139S017AB
XXX
1139S018AB
XXX
1139S019AB
XXX
1139S020AB
XXX
1139S021AB
S-18
Multi-Copy
Display
JC
JC
JC
JC
JC