ADC Soneplex Broadband System Operation And Maintenance Manual page 320

NEND
LOOP 1
HLXC
LOOP 2
NEND
TO NETWORK
KEY
NEND means "at the HLXC, looking toward the customer (HLXR)."
FEND means "at the HLXR, looking toward the network (HLXC)."
REPC means "at the HRX, looking toward the customer (HLXR)."
REPR means "at the HRX, looking toward the network (HLXC). "
REPR (PM Reports) = C-SIDE (Display Status) = LINE 1 (TL1)
REPC (PM Reports) = R-SIDE (Display Status) = LINE 2 (TL1)
Figure 101-7. HDSL HLXC/HRX/HLXR NEND and FEND Locations (MPU V5.1)
CRP1
NEND
XCVR
LOOP 1
HLXC
LOOP 2
XCVR
NEND
CRP1
TO NETWORK
KEY
NEND means "at the HLXC, looking toward the customer (HLXR)."
FEND means "at the HLXR, looking toward the network (HLXC)."
CRP1 means "at the central office side of the HRX1, looking toward the network (HRX2/HLXR)."
RRP1 means "at the remote (CPE) side of the HRX1, looking toward the customer (HLXC)."
CRP2 means "at the central office side of the HRX2, looking toward the network (HLXR)."
RRP2 means "at the remote (CPE) side of the HRX2, looking toward the customer (HRX1/HLXC)."
CRP1 (Alarm History, PM Reports, and Status screens) = LINE 1 (TL1)
RRP1 (Alarm History, PM Reports, and Status screens) = LINE 2 (TL1)
CRP2 (Alarm History, PM Reports, and Status screens) = LINE 3 (TL1)
RRP2 (Alarm History, PM Reports, and Status screens) = LINE 4 (TL1)
NOTE: CRP2 and RRP2 are not present when there is no HRX2.
Figure 101-8. HDSL HLXC/HRX/HLXR NEND and FEND Locations (MPU V5.2)
ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance
REPR
XCVR XCVR
HRX
XCVR XCVR
REPR
RRP1
XCVR
LOOP 1
HRX1
LOOP 2
XCVR
RRP1
REPC
FEND
LOOP 1
LOOP 2
FEND
REPC
TO CUSTOMER
CRP2 RRP2
XCVR XCVR
LOOP 1
HRX2
LOOP 2
XCVR XCVR
CRP2 RRP2
© 2000, ADC Telecommunications, Inc.
TAP-101
Page 11 of 13
HLXR
9450-B
FEND
HLXR
FEND
TO CUSTOMER
11375-A
2-297