ADC Soneplex Broadband System Operation And Maintenance Manual page 135

ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance
DLP-533
Page 4 of 5
FIELD TYPE
Span Power Toggle
Setting**
Pulse Toggle
Equalization**
LBO Setting** Toggle
Programmable Toggle
Loopback
NID Loopback** Toggle
*Note: The RLXIOR configuration field default values shown in this manual are valid for systems with an MPU installed.
**Note: Although unit switch settings (Pulse Equalization, Span Power, NID Loopback, and LBO) are shown at the bottom of the
configuration screen, none of the displays are meaningful for the RLXIOR. First, there are no on-board switches for Pulse
Equalization, NID Loopback, and LBO. In addition, although the RLXIOR has an on-board Line Power switch, the Span Power
unit switch setting display is locked at "DISABLED".
2-112
© 2000, ADC Telecommunications, Inc.
Table 533-1. RLXIOR Configuration Fields, continued
OPTIONS
UNIT SWITCH Stops span power on the RLXIOR.
ENABLED Enables span power using the on-board
switch settings (–130V or ±130V). The
default switch setting is –130V.
DISABLED Stops span power on the RLXIOR.
UNIT SWITCH Selecting this option on the RLXIOR
creates a setting of 0–133 ft.
0–133 ft., 133–266 ft., The DS1 signal output provides standard
266–399 ft., 399–533 ft., DSX signal levels which can be
or 533–655 ft. compensated for various distances.
UNIT SWITCH Selecting this option on the RLXIOR
creates a setting of 0.0 dB.
0.0 dB, 7.5 dB, 15.0 dB, Sets the LBO in decibels.
or 22.5 dB
ENABLED Enables response to programmable
loopback codes.
DISABLED Disables response to programmable
loopback codes.
UNIT SWITCH Disables loop-up response to NID arming
code. The loopback armed state transitions
to "Armed" when the NID arming code is
received.
ENABLED Enables response to NID loopback codes.
DISABLED Disables loop-up response to NID arming
code. The loopback armed state transitions
to "Armed" when the NID arming code is
received.
DESCRIPTION
ENABLED
UNIT SWITCH (Loop
Extender chassis only)
NOT APPL (locked field
in Broadband chassis
only)
UNIT SWITCH
DISABLED
ENABLED
DEFAULT*
(continued)