Siemens ET 200SP Manual page 73

Configuring/address space
4.3 Pulse train mode
On delay for pulse output
Duty cycle
When configuring with HSP for STEP 7 or with a GSD file, you define the channel configuration by
1
the selection of the module name.
Note
PROFIBUS GSD configuration
When configuring with a PROFIBUS GSD file, the possible parameter assignments are not
available. The parameters are preassigned in the module with the default setting. Set the
"Pulse train" mode and the further parameters in the user program using data record 128.
72
Parameter
0...85000000 μs
Dependent on the output format
Value range
Technology Module TM Pulse 2x24V (6ES7138‑6DB00‑0BB1)
Manual, 05/2019, A5E35061186-AB
Scope
Channel
Channel