Siemens ET 200SP Manual page 29

Configuring/address space
4.1 Pulse output (single pulse) mode
Parameters of the TM Pulse 2x24V in "Pulse output" mode
The default settings of the parameters are shown in bold in the "Value range" column.
Table 4- 2
Channel configuration
Reaction to CPU STOP
Substitute value for DQA
Substitute value for DQB
Group diagnostics
Diagnostics DQA
Diagnostics DQB
High-speed output (0.1 A)
Function DI
Input delay for digital inputs
Output format
On delay for pulse output
When configuring with HSP for STEP 7 or with a GSD file, you define the channel configuration by
1
the selection of the module name.
Note
PROFIBUS GSD configuration
When configuring with a PROFIBUS GSD file, the possible parameter assignments are not
available. The parameters are preassigned in the module with the default setting. Set the
"Pulse output" mode and the further parameters in the user program using data record 128.
28
Adjustable parameters
Parameter
1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
0...85000000 μs
Value range
2 channels (2 A)
1 channel (4 A)
Output substitute value
Continue operation
0
1
0
1
Deactivated
Activated
Deactivated
Activated
Deactivated
Activated
Deactivated
Activated
Input
HW enable
None
0.05 ms
0.1 ms
0.4 ms
0.8 ms
1.6 ms
3.2 ms
12.8 ms
20 ms
S7 analog output
1/100
1/1000
1/10000
Technology Module TM Pulse 2x24V (6ES7138‑6DB00‑0BB1)
Scope
Module
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Manual, 05/2019, A5E35061186-AB