Siemens ET 200SP Manual page 131

Configuring/address space
4.9 Explanation of parameters
Operating mode
Pulse train
On/Off delay
Frequency output
PWM with DC motor
Parameters cannot be assigned in isochronous mode
1
130
Meaning
The channel outputs a number of pulses. You specify
the number of pulses in the control interface.
The channel outputs pulses with specified switching
delay with respect to DI0. You specify the On delay in
the control interface.
The channel outputs a signal with a fixed duty cycle of
50%. You specify the frequency in the control interface.
The channel outputs a pulse width modulated signal for
controlling a DC motor in both directions of rotation.
You specify the duty cycle in the control interface.
Mode-dependent parameters
High-speed output (0.1 A)
•
Function DI
•
Input delay
•
Output format
•
Period duration
•
Actual period duration
•
On delay
•
Duty cycle
•
High-speed output (0.1 A)
•
Input delay
•
Off delay
•
High-speed output (0.1 A)
•
Function DI
•
Input delay
•
Output format
•
On delay
•
Function DI
•
Input delay
•
Output format
•
Period duration
•
Actual period duration
•
On delay
•
Technology Module TM Pulse 2x24V (6ES7138‑6DB00‑0BB1)
Manual, 05/2019, A5E35061186-AB
1
1