Configuring Status Polling - Avaya 8800 User Interface Fundamentals

Variable definitions
The information in the following table describes the options in the shortcut menu.
Edit General
Edit IP
Edit IPv6
Graph
Enable
Disable

Configuring Status Polling

Use this procedure to configure when to update the LED/Port status.
Procedure steps
1. From the navigation menu, open Configuration > Device > Preference Setting.
2. Click Enable under Status Polling.
3. Select a poll interval from the options available.
4. Click Apply.
User Interface Fundamentals
Select an option from the shortcut menu.
Variable
Displays the Configuration, Edit, Port tabs, with the Interface
tab open, for only the selected ports.
Displays the Configuration, Edit, Port, IP tabs, with the IP
Address tab open, for only the selected ports.
Displays the Configuration, Edit, Port, IPv6 tabs for only the
selected ports.
Displays the Configuration, Graph, Port tabs, with the
Interface tab open so you can graph statistics for the
selected ports.
For more information about graphing, see Performance
Management (NN46205-704).
Administratively brings the selected ports up. A warning box
appears and you must select Yes to enable the ports.
Administratively shuts down the selected port ports. A
warning box appears and you must select Yes to shut the
ports down.
Configuring Status Polling
Value
July 2013 69