Avaya 8800 User Interface Fundamentals page 50

Enterprise Device Manager procedures
html-source-dir help-tftp <file>
http-port <integer>
info
password <rwa> <username>
<passwd>
secure-only <enable|disable>
Example of configuring the Web server using the CLI
This configuration example shows you how to enable the Web interface, specify the number
of rows in the display, and display Web interface parameters.
Procedure steps
1. Enable the Web interface using the following command:
2. Specify the number of rows in the display using the following command:
3. Display the web interface parameters using the following command:
4. Display if Web access is enabled as well as password and access information using
5. Disable the secure-only parameter using the following command:
50 User Interface Fundamentals
Variable
config web-server enable
config web-server def-display rows 25
config web-server info
the following command:
show web-server
Comments? infodev@avaya.com
Specifies the file location and name for the Web server
HTML Help file.
• file specifies the path and file name of the HTML
source.
Specifies the HTTP port of the Web server.
• integer is a value from 1 to 49151.
Indicates whether Web access is enabled or disabled on
the switch and displays the current Web user name and
password setting.
Sets passwords for access to the Web interface.
• username is the user's log on name, up to 20
characters long.
Note that regardless of the username you choose, the
access level provided to the Web/EDM user is rwa.
• passwd is the password associated with the log on
name, up to 20 characters long.
Enable secure-only to restrict the Web access mode to
HTTPS. This is the default setting. Disable to allow
HTTP access to the switch.
Value
July 2013