Enabling The Web Server Using The Acli - Avaya 8800 User Interface Fundamentals

Enabling the Web server using the ACLI

Disabled by default, you can use the following procedure to enable and manage the Web server
using the ACLI. After you enable the Web server, you can start EDM.
Procedure steps
1. In Global Configuration mode, enable the Web server using the following command:
2. Disable the web server with the following command:
3. In the privEXEC configuration mode, display the web-server status using the
For more information, see the following Variable definitions table.
Variable definitions
Use the data in the following table to use the web-server command.
Table 8: Variable definitions
def-display-rows
enable
User Interface Fundamentals
config web-server secure-only disable
Web Server Info :
Status : on
Secure-only
RWA Password
Def-display-rows
Html help tftp source-dir :
HttpPort
NumHits
NumAccessChecks
NumAccessBlocks
NumRxErrors
NumTxErrors
NumSetRequest
web-server enable
no web-server enable
following command:
show web-server
Variable
: disabledRWA Username
: ********
: 30
: 80
: 57
: 7
: 2
: 49
: 0
: 0
Sets the number of rows displayed on each page,
between 10 and 100.
Enables the Ethernet Routing Switch Web interface.
Enabling the Web server using the ACLI
: admin
Value
July 2013 51