Chapter 5: Cli Procedures; Exiting And Entering The Cli; Using Edit Commands - Avaya 8800 User Interface Fundamentals

Chapter 5: CLI procedures

This section contains information about common CLI tasks.

Exiting and entering the CLI

End a CLI session with the following procedure.
Procedure steps
1. End a CLI session with one of the following commands:
2. Enter the following command to log back on to the CLI.

Using Edit commands

Use Edit commands to modify CLI command text, and navigate within commands.
Procedure steps
1. Type ESC to enter the edit mode.
2. Use the commands listed in the following table to make the edits.
3. Press the Return key to move to the next line.
User Interface Fundamentals
• quit
• logout
• exit
login
July 2013 29