Selecting And Launching A Vrf Context View Using Edm - Avaya 8800 User Interface Fundamentals

4. Using EDM on the switch, open the following folders: Configuration > Security >
5. Double-click General.
6. Click the Web tab.
7. In the HelpTftp/Ftp_SourceDir field, enter the FTP or TFTP server IP address and
8. To test that the help is working properly, select any tab (for example, Edit >

Selecting and launching a VRF Context view using EDM

Use this procedure to switch to another VRF Context view when you use the embedded EDM.
GlobalRouter is the default view at log in.
You can configure both Global Router (GRT) and Virtual Routing and Forwarding (VRF)
instances when you launch a VRF context view. The default view is text.
LIMITATION: you can open only 5 tabs per session.
Important:
If you log out from the GRT view, the system generates a warning: all tabs will be closed –
and your session terminates. If you close a VRF view tab, you close only that view.
Note:
The Set VRF Context view function is not available to users in a service provider deployment
where only a tenant VRF view is assigned. If you use a tenant VRF view, we recommend
that you use the applicable EDM plugin with COM to access EDM. COM provides VRF
mapping and Role-Based Access Control.
Procedure steps
1. From the navigation tree, select Configuration > VRF Context view.
2. Click Set VRF Context view.
3. Select a VRF ID from the list.
4. On the toolbar, click the Launch VRF Context view button.
User Interface Fundamentals
Control Path.
the path of the online directory where the files are unzipped, in the following format:
<TFTP/FTP-server-IP-address>:ERS8000_70_Help.
Chassis) and click the Help button.
The appropriate EDM help page appears.
A new browser tab opens containing the selected VRF view.
Selecting and launching a VRF Context view using EDM
July 2013 57