Using Dialog Boxes - Avaya 8800 User Interface Fundamentals

5. Open the Configuration > Edit > Chassis folders.
6. In the ActionGroup1 section of the System dialog box, click saveRuntimeConfig

Using dialog boxes

Many EDM dialog boxes contain editable fields where you can enter parameter values.
Some of those parameters have predetermined values. For example, you can enable or disable
a port.
Other parameter values are ranges of user-determined values. For example, the value for a
system contact is a name you enter in the SysContact field. Editable fields in EDM dialog
boxes appear in white.
Procedure Steps
1. Double-click the field and select the drop-down icon.
2. Click a new value from the list.
3. For fields without preset values, double-click the field and enter the value.
4. Click Apply.
Important:
• Enter an IP address in decimal format:
<xxx>.<xxx>.<xxx>.<xxx>
• Enter a MAC address in hexadecimal format:
xx:xx:xx:xx:xx:xx
• Time is a value based on the delta from the switch boot-up time. Multiple time formats
and calculations exist, depending on the feature.
See the following table for EDM dialog box button descriptions.
EDM dialog box buttons
The following table describes buttons that appear in EDM dialog boxes and tabs. Not all buttons
appear in all dialog boxes.
User Interface Fundamentals
Changes are not applied to EDM until you click Apply.
to make the changes permanent.
The choices for that parameter appear.
Using dialog boxes
July 2013 63