Avaya 8800 User Interface Fundamentals page 52

Enterprise Device Manager procedures
help-tftp
http-port
password
secure-only <enable|disable>
Example of configuring the Web interface using ACLI
This configuration example uses the web-server commands to enable the web interface and
specify the number of rows in the display. The example also uses the show command to
display web interface parameters.
Procedure steps
1. Enable the web interface using the following command in global configuration mode:
2. Specify the number of rows in the display using the following command:
3. Display the web interface parameters using the following command:
4. Disable the secure-only parameter using the following command:
52 User Interface Fundamentals
Variable
web-server enable
web-server def-display-rows 25
show web-server
no web-server secure-only
Web Server Info :
Status: on
Secure-only: disabledRWA Username:
RWA Password: ********
Def-display-rows: 30
Html help tftp source-dir:
HttpPort: 80
Comments? infodev@avaya.com
To disable the web-server, use the following command:
no web-server [enable]
Specifies the file location and name for the Web server
HTML Help file in the following format: <WORD/0-256>
{a.b.c.d:| peer: | /pcmcia/ | /flash/ |} <file> <string length
0..256>
Specifies the HTTP port of the Web server. The value
is from 1 to 49151.
Sets user names and passwords for access to the Web
interface in the following format: {rwa}<WORD/1-20>
<WORD/1-20>
Note that regardless of the user name you choose, the
access level provided to the Web/EDM user is rwa.
Enable secure-only to restrict the Web access mode to
HTTPS. This is the default setting.
no web-server secure-only
Use the
command to disable the web-server secure-only option
and allow HTTP access to the switch.
admin
Value
July 2013