Table of Contents
Advertisement
5
•
Unplug the fan upward out of the H
•
Plug a new DC fan in the empty slot.
•
Tighten the securing screw [5].
•
Replace the top cover and tighten the screws of the top cover.
•
Close the filter flap.
•
Lock the front cover.
•
Remove the H
to its location and reconnect the cabling.
YDRA
Barco – Hydra – R5976260 – Revision 10 – February-2004
.
YDRA
_______________________________________________________________________________________________________
5. Maintenance
5-6
Advertisement
Table of Contents
