5.2 Exchange of consumables
5.2.1 Replacing the filter pad of Hydra
The filter pad of the H
YDRA
The air filter is located behind the ventilation slits on the front of H
•
Unlock the front cover of H
•
Open the filter flap upwardly!
•
On the inner side of the filter flap there is a securing screw, which holds a steel plate and the filter. Loosen
this screw!
•
Now you can remove the steel plate and the filter pad from the filter flap. Remove the old filter pad from
the steel plate and put a fresh one on it!
•
Place the steel plate on its location on the filter flap and tighten the securing screw!
•
Close the filter flap!
•
Lock the front cover!
Barco – Hydra – R5976260 – Revision 10 – February-2004
case has to be changed in intervals, depending on the grade of pollution of the air.
with the key!
YDRA
_______________________________________________________________________________________________________
.
YDRA
5. Maintenance
5-3