Output Card - Barco Hydra User Manual

3.2.6 Output card

The H supports different types of output cards: the one channel output cards, the DVI-DVI digital/analog out-
YDRA
put cards and the DVI-DVI digital output cards.
The one channel output card provides the facility to connect a projection module or monitor for the graphical
output of the H . An analog device and a digital device can be connected and controlled s An analog device and a digital device can be connected and controlled simultaneously.
YDRA
Connectors
On the output card there is a Sub D15 connector and a PanelLink™ connector.
1 Sub D15 connector for analog output
2 PanelLink MDR 26p connector fo MDR 26p connector for digital output
Dual mode
In dual mode a second output card is inserted next to the first output card. The first output card must be con-
nected to the left projection module seen from front of the Display Wall. The second output card is connected to
the right projection module. Please refer also to section
Barco – Hydra – R5976260 – Revision 10 – February-2004
1
4.4 Dual mode.
______________________________________________________________________________________________________
3. Getting started
Figure 3-16
Connectors of one channel output card
3-18