Table of Contents
Advertisement
Connectors of OVL IPU/2 and OVL IPU/3
The overlay input card OVL IPU/2 and OVL IPU/3 provides a DVI-I connector to insert digital data and a D15 con-
nector to insert an external time code (LTC or VITC) or gen
1
connector LTC, VITC or genlock (D15) 5)
2
input connector (DVI-I) for digital graphic data
3
green LED – DVI input active
4
green LED – active genlock
The green LED [3] on the left indicates, if a signal for the background is active. The green LED [4] on the right
indicates, if a genlock, LTC or VITC signal is active.
Order
The overlay input card is inserted on the left side of the single board computer (looking from back on the H
leaving exactly two empty slots.
Barco – Hydra – R5976260 – Revision 10 – February-2004
(LTC or VITC) or genlock source.
_______________________________________________________________________________________________________
3. Getting started
Figure 3-8
Ports of the overlay input card
)
YDRA
3-9
Advertisement
Table of Contents
