Barco Hydra User Manual page 19

The table below lists the names and functionality of the LED's at the front of H
number name
[2] green power OK
[9] red power unit failed reserved for future use
[3] green booting
[10] red booting failed
[4] green software
heartbeat
[11] red system error
Details concerning software heartbeat [4] and system errors [11] can be seen in the Module Status and Wall
Alarms list respectively, please refer to the sections
Barco – Hydra – R5976260 – Revision 10 – February-2004
state meaning
ON – permanent +3.3 V on the overlay board is OK
OFF +3.3 V on the overlay board failed
ON – blinking H
YDRA
ON – permanent H
YDRA
ON - blinking H
YDRA
OFF H
YDRA
ON – blinking H
YDRA
(starts running after successful configuration)
OFF H
YDRA
ON – blinking operation error occurred
OFF no operation error
Module Status
_______________________________________________________________________________________________________
:
YDRA
gets configured
configuration was successful
configuration failed
configuration was successful
software is running
software is down
Allocation of LEDs on front of H
and Wall Alarms Area in the iS
3. Getting started
Table 3-1
YDRA
user's manual.
TUDIO
3-3