Table of Contents
Advertisement
3. Getting started
3.3.3 Switching off
If the H
was operated with the iS
software it must be halted before it can be switched off. Therefore use
YDRA
TUDIO
the command Halt module of the Module menu, please refer to the iS
user's manual, section
Module Control
Control.
TUDIO
This command halts the H
. If you want to switch off all H
units of a wall you also can use the command
YDRA
YDRA
Halt wall from the Wall menu. When the H
is halted it stops to send an output signal to the projection mod-
YDRA
ules and they show their original display, e.g. a black or blue screen. If so the H
can be switched off with the
YDRA
power switch [6] at the front of it
[6] at the front of it.
______________________________________________________________________________________________________
Barco – Hydra – R5976260 – Revision 10 – February-2004
3-28
Advertisement
Table of Contents
