Table of Contents
Advertisement
3.2.2 Single board computer
The H
is connected to the LAN via the Ethernet connector on the single board computer.
YDRA
Connectors
1
serial port
2
VGA connector
A connector (only used for service)
3
green LED
4
Ethernet connector
5
yellow LED
6
PS/2 keyboard (only used for service)
To connect the H
to the Ethernet connector [4], a 100Base-T cable with twisted transmitter and receiver
YDRA
pairs must be used.
Besides a keyboard connector [6] and
) there is a standard serial port connector [1].
DRA
Order
The single board computer is always inserted to the right in the first slot (counted from right to left, if looking
from back on the H
).
YDRA
Barco – Hydra – R5976260 – Revision 10 – February-2004
1
2
3
4
5
6
6] and VGA connector [2] (both not used during standard operation of the H
_______________________________________________________________________________________________________
3. Getting started
Figure 3-6
Ports of single board computer
Y-
3-7
Advertisement
Table of Contents
