Table of Contents
Advertisement
The DVI-DVI digital output card provides the facility to connect two projection modules or monitors for the graphi-
cal output of the H
YDRA
OPU DDD.
Connectors
On the DVI-DVI digital output card there are two DVI-I connectors.
1
DVI-I connector for digital output channel 1
2
DVI-I connector for digital output channel 2
green LED output channel 1 ( reserved for future use )
3
green LED output channel 2 ( reserved for future use )
4
Dual mode
To use dual mode, the second output channel is used for a second display device. Please refer to section
mode
for correct cabling.
Order
The output cards are inserted into the slot on the left of the last video/RGB input cards (looking from the back on
the H
).
YDRA
There is no empty slot allowed between the last video/RGB input card and the output card!
Barco – Hydra – R5976260 – Revision 10 – February-2004
. The output data is provided for digital connection. The front plate is labeled with
wed between the last video/RGB input card and the output card!
______________________________________________________________________________________________________
1
3
4
2
B input cards (looking from the back on
3. Getting started
Figure 3-18
Connectors of DVI-DVI digital output card
4.4 Dual
3-20
Advertisement
Table of Contents
