Table of Contents
Advertisement
HD-SDI video input card
On the HD-SDI video input card there are four BNC connectors; two connectors are to insert the HD-SDI video
signals and two connectors are to loop through the signals to another monitor. Furthermore there is a 8 pin RJ45
GPIO connector that enables t
Standards
The HD-SDI video input card support the SMPTE 292M standard.
1
green LED path B B
2
RJ45 GPIO connector
3
green LED path A
4
loop-through HD-SDI channel B
5
HD-SDI input channel B
6
loop-through HD-SDI channel A
7
HD-SDI input channel A
All unused outputs of the HD
sed outputs of the HD-SDI video input card ([4] and [6]) should be terminated with a
75 Ohm BNC terminator!
Barco – Hydra – R5976260 – Revision 10 – February-2004
bles to have three tallies per video and two green LED's.
______________________________________________________________________________________________________
3. Getting started
Figure 3-13
Connectors of HD-SDI video input card
3-15
Advertisement
Table of Contents
