Barco Hydra User Manual page 55

Loosen the screws 1 to 3 shown in the figure above on both sides of the case.
Loosen as well the screw 4 shown in the figure above on the top of the case. For these screws you need a size 2
Phillips screwdriver.
Now you can easily remove the top cover.
If you have removed the top cover of the H
replace the cover before powering up again!
•
Looking from top to the H
[5] of the defective DC fan.
Barco – Hydra – R5976260 – Revision 10 – February-2004
4
you see the four DC fans close to the front cover. Loosen the securing screw
YDRA
_______________________________________________________________________________________________________
Position of screws on the side of the H
Position of the screw on the top of the H
in order to exchange a DC fan, be sure to
YDRA
5. Maintenance
Figure 5-2
YDRA
Figure 5-3
YDRA
Figure 5-4
Screws of the case of H
YDRA
5-5