Table of Contents
Advertisement
Dual SDI video input card
On the Dual SDI video input card there are four BNC connectors; two connectors are to insert the SDI video signals
and two connectors are to loop through the signals to another monitor. Furthermore there is a 8 pin RJ45 GPIO
connector that enables to have three tallies per video and two green LED's.
In respect to available insertion slots in the H
Standards
The Dual SDI video input card supports the standard SMPTE 259M.
1
green LED path B B
2
RJ45 GPIO connector
3
green LED path A
4
loop-through SDI channel B
5
SDI input channel B
6
loop-through SDI channel A
7
SDI input channel A
Barco – Hydra – R5976260 – Revision 10 – February-2004
it is more advisable to use Quad SDI video input cards instead.
YDRA
1
3
4
5
6
7
______________________________________________________________________________________________________
ED's.
Connectors of Dual SDI video input card
3. Getting started
Figure 3-11
SDI video input card
3-13
Advertisement
Table of Contents
