Table of Contents
Advertisement
3.2.5 RGB input card
The RGB input card has two independent DVI plugs to connect two analog or digital RGB sources to the
RGB input card has two independent DVI plugs to connect two analog or digital RGB sources to the H
Two LED's indicate if there is a source connected or not (one LED for each RGB input channel).
Standards
The RGB input card processes analog RGB and HD-RGB input signals, digital RGB input and component video RGB.
Connectors
On the RGB input card there are two DVI-I connectors and two green LED's.
1
IN B – DVI-I connector
2
green LED IN B
LED IN B
3
green LED IN A
4
IN A – DVI-I connector
Order
For the order in which the RGB input cards are inserted in the Hydra applies the same rule as for the video input
cards, please refer to section
Maximal number of RGB input cards
The number of RGB input cards that can be used in one H
furthermore depends on the number of Dual analog video input cards that are used in the same H
being the number of the RGB input cards and V being the number of the Dual analog video input cards the fol-
lowing rule must be applied for a H
1.0 ≥ (0.225 * R) + (0.04 * V)
With a non-redundant power net the following rule must be applied:
1.125 ≥ (0.225 * R) + (0.04 * V)
Barco – Hydra – R5976260 – Revision 10 – February-2004
3.2.4 Video input
card.
put cards
with redundant power net:
YDRA
______________________________________________________________________________________________________
is limited due to the output of the power supply. It
YDRA
3. Getting started
.
YDRA
Figure 3-15
Connectors of RGB input card
. With
With R
YDRA
3-17
Advertisement
Table of Contents
