Table of Contents
Advertisement
3.2.3 Overlay input card
The overlay input card has an input connector that can be used to integrate digital graphical data with the data
from the SBC. Input can be any graphical data with the appropriate timing and resolution. In partic
Input can be any graphical data with the appropriate timing and resolution. In particular the over-
lay input card can be used to configure the system for redundant operation, please see section
operation. There are different models of the overlay input card: the OVL IPU with MDR-26 PanelLink™ connector
and the OVL IPU/2 and OVL IPU/3 with DVI connector and D15 connector for synchronization.
/2 and OVL IPU/3 with DVI connector and D15 connector for synchronization.
Connectors of OVL IPU
1
input connector (PanelLink)
Barco – Hydra – R5976260 – Revision 10 – February-2004
1
_______________________________________________________________________________________________________
3. Getting started
4.3 Redundant
4.3
4.3
4.3
Figure 3-7
Port of the overlay input card OVL IPU
3-8
Advertisement
Table of Contents
