Setting One Original At A Time - Ricoh FT3813, FT4615, FT4618 Operating Instructions Manual

SETTING ORIGINALS IN THE OPTIONAL DOCUMENT FEEDER

Setting One Original At A Time

You can insert one original at a time into the document feeder. The original
is automatically fed onto and removed from the exposure glass.
Set the original after correction fluid and ink has completely dried. Not taking
this precaution could mark the exposure glass and cause marks to be copied.
The original might become dirty if it is written with a pencil or similar tools.
.
1
Correct any curl, fold, or crease
in the originals before setting.
.
2
Confirm that the Insert Original
indicator is lit before setting the
originals.
.
3
Confirm that no previous originals
remain on the exposure glass.
.
4
Adjust the guides to the original
size.
.
5
Set the original face up into the
document feeder until the Insert
Original indicator goes off.
If you are copying a stack of originals
one sheet at a time and you want to
keep them in order, start with the last
page of the originals.
The original guides must touch both
sides of the original.
22