Installing The Mounting Brackets On The Secure Router 4134 - Avaya Secure Router 4134 Installation Manual

Prepare and install the Avaya Secure Router 4134 chassis
Accessory
Female DB-9 to RJ-45
connector
Power cord
Terminal (ground) lug and
two screws
Software and documentation
CD
Installing the mounting brackets on the Secure Router
4134
You must install the mounting brackets on the Secure Router 4134 before you install the
chassis in an equipment rack. You can mount the Secure Router 4134 with either the front
panel or the back panel facing the operator. The following table shows the six possible
mounting positions.
Average time to install mounting brackets: 2 minutes.
Table 9: Mounting bracket installation options for the Secure Router 4134
Position
Position 1 with front panel
facing operator
38 Installation — Chassis
Description
Use, if necessary, to connect the console
cable to a terminal or PC.
Country-specific power cord provided for AC
input. One power cord is provided for each
power supply module you ordered. The
power cord is a no-charge item that is
supplied with the chassis; however it must
appear as a separate item on your order.
Connects the ground wire to the front panel
of the chassis. Screws: 8-32 x .187 inch (in.)
pan head screws with external tooth washer
(2)
Contains the Secure Router 4134 software
image file, as well as the installation and
configuration manuals.
Comments? infodev@avaya.com
Description
Verified
August 2013