Table of Contents
Advertisement
13.
NOTE:
• This step is only for Europe.
• When installing the Super G3 FAX Board at the same
time, assemble it by following the same procedure.
Connect the PTT Plug matched the field or area to the
PTT Cable (6 contact type).
CAUTION:
Do not connect the Telephone Cord (2 contact type)
with the PTT Plug.
1x
14.
CAUTION:
• When using the "EXT" modular terminal, use a
flatblade screwdriver, etc. to remove the Modular
Spacer located in the modular terminal area.
• Keep the removed Modular Spacer.
• Do not insert a screwdriver, etc. into the modular
terminal.
NOTE:
Connect the end of the PTT Cable or Telephone Cord to
the Modular Jack (LINE 1 and LINE 2) on the host
machine, and connect the other end to the Modular Jack
on the wall.
2x
15.
Connect the power plug to the outlet.
1164
9. Installation
Advertisement
Table of Contents
Troubleshooting
